Loading and unloading pallets with a pallet truck safely is essential in order to avoid injuries. So, in order to protect yourself and others, we’ve compiled a list of suggestions for securely unloading pallets using a pallet truck.
Ways for carefully unloading pallets with a pallet truck:
Do not attempt to unload pallets until the pallet truck has completely stopped.
When you arrive at the truck, bring the pallet truck to a complete stop, and make sure it is vertically facing the load. It is also essential that you align the forks/arms of the pallet truck with the pallet that must be unloaded from the truck and insert them into the pallet. These procedures will offer you more control over the equipment and allow you to ensure that the material products being unloaded are securely placed on the pallet jack.
Take your time.
When operating a pallet truck, you must take your time since material products might be destroyed while being transferred. Furthermore, operating the pallet truck at too high a speed puts you and other workers in risk if you lose control and are unable to properly stop. When putting products into the pallet truck, insert the arms slowly until the weight is resting against the backrest.
If the arms are not correctly put into the pallet, do not remove the load from the truck.
If just one pallet truck arm is placed into the pallet or if the arm is not inserted far enough (the load should sit against the backrest), do not attempt to remove the load and instead re-adjust the arms. If you continue to move the load while the arms are not properly fitted, the products may fall, causing harm and putting others in danger.
Don’t forget to take a look your surroundings.
Before reversing a pallet truck and while handling one, you should be aware of your surroundings and glance around for any impediments or workers who may be in the way.
Remember to lower the arms and tilt the load backwards.
When you are outside of the truck from which you are unloading, stop the pallet truck, lower the fork arms, and tilt the load rearward. If the load is not tilted backwards, the items may fall off the fork arms.
Don’t go backwards any more till your route is clear.
To avoid accidents, double-check that the way behind you is clear before reversing to drop the item off at the right location. It is also essential not to drive the pallet truck too fast, as this increases the danger of destroying items and injuring people.
Never go beyond the load limitations.
When utilizing pallet trucks, never exceed the maximum weight limit since overloading might cause the pallet trucks to tip over, causing damage to the products, the surrounding area, and perhaps endangering people in the workplace.
When operating a pallet truck, you should always take precautions and adhere to all health and safety rules.